|B-100-2FEA||N/A Clamp Hanger Set - 2 pieces||N/A Clamps both sides of hanger.||N/A 0.30 lb|
|FE-908-1M||N/A Connector Tool||
N/A One tool usually ordered for each new system.
Used to pull two sections of bar together.
|N/A 2.88 lb|
|FE-908-1MB||N/A Connector Tool Pins - Pair||N/A||N/A 0.10 lb|
|FE-1GC||N/A Flexible PVC End Cap||N/A For all Figure 8 conductor bars.||N/A 0.04 lb|
|FE-908-A||N/A Nylon Anchor Pin||N/A For drilled anchoring. Two required at each hanger.||N/A 0.02 lb|
|FE-2ER-EX||N/A Splice Cover - Standard black||N/A Use this part number when ordering extra splice covers.||N/A 0.05 lb|
|B-100-2L||N/A Spring Cover Clip - Zinc Plated Steel||
N/A Used only to ensure alignment of the cover on laterally mounted systems.
Placed midway between hangers.
|N/A 0.03 lb|