Call: 708-771-1600Request a QuoteRequest a QuoteSearch
  • COFFING Hoist Accessories Filter-Lubricator Units

    Air hoists must have a supply of clean, lubricated air for their operation. A filter and lubricator must be installed in the air supply line, as close as practical to the hoist. The recommended operating air pressure for all capacities of COFFING® air hoists is 90 PSI. When air line pressure exceeds 115 PSI, it is required that a pressure regulator be provided in the supply line to maintain proper pressure.

  • COFFING Hoist Chain Containers

    Chain containers provide an ideal means for eliminating hanging tail chains. They are easily installed and accept the chain in such a way that chains tend not to kink or twist. State codes often specify the use of a chain container with each hoist.

  • Image

    Complete Air Hose Assembly requires ordering Air Supply Hose and Fittings.

  • Image

    Complete Air Hose Assembly requires ordering Air Supply Hose and Fittings.

  • COFFING Air Hose Trolleys

    ACCESSORIES AIR POWERED HOISTS

    These trolleys are used to support air hose and are installed on the same track as a hoist. Hose clamp swivels and will fit 5/8 to 11/2 inch diameter hoses.

  • COFFING Hoist Accessories - Recoil Air Hose with Fittings

    For application where air hose trolleys with looped hose is impractical: coil type self-storing hose is recommended.

  • COFFING Hoist Accessories - Air Hose Reels

    Whichever hose-use problem you may have – on the production line, in the shipping area or in maintenance – these automatic retracting reels can provide the solution. Easy-set mounting lugs and adjustable 4-roller guides allow variable mounting for ceiling, wall, bench or trucks. An instant-action ratchet lock engages when hose travel stops, disengages with a slight pull. Other features include the “Safe-to-Change” spring motor which is self-contained for safe handling and all-steel construction for maximum reliability. Hose and ball stop are included. Pivot Base is optional.

  • COFFING Hoist Accessories - Other Available Air Hoist Accessories

    Systems include (note numerical key in illustration):
    (1) 2 End Clamp Assemblies;
    (2) 1 Hardware Kit consisting of 2 eye-bolts, 5 clamps and 1 ball stop;
    (3) Intermediate Carriers—see specified quantity in last column of chart below;
    (4) Nylon Covered Wire Rope per required length.

    Hose Systems (from 0.91” to 1.25” O.D.)

  • Image

    OTHER AVAILABLE AIR HOIST ACCESSORIES

    All hoists are furnished as standard with hooks equipped with hook latches. Bullard Hooks with a rugged cast swing gate locking member that provides greater assurance of load containment are available at additional cost.

  • Image

    OTHER AVAILABLE AIR HOIST ACCESSORIES

    Hoist suspension redundant support for the CAH-Small Frame hoist is available for additional cost. This redundant support features a cable that inserts through the hoist frame and around initial support.

  • Image

    OTHER AVAILABLE AIR HOIST ACCESSORIES

    Kit for converting the pull cord CAH-Small Frame COFFING® Air Hoist to pendant throttle operation has a standard 6-foot pendant hose assembly. Longer hose assemblies available. Order Model No. C2269. Shipping weight is 8 pounds.

^