Call: 708-771-1600Request a QuoteRequest a QuoteSearch
  • CM Powerstar Electric Chain Hoist

    Designed specifically as an alternative to wire rope hoists for high speed lifting of loads from 2 to 20 tons in a space saving chain hoist.

    • H-4 or better rated duty cycle
    • Designed for heavy-duty industrial applications from 2 to 20 ton capacities
    • Liftwheel has machined chain pockets and is heat treated alloy steel for maximum strength and wear resistance
    • Efficient regenerative braking system avoids heat generation in power train
    • Motors up to 7 1/2 h.p. provide a wide range of lifting speeds
    • Single or two speed controls. Two speed models operate on 3:1 speed ratio
    • Standard adjustable upper and lower screw limit switches
    • Standard overload Protector device
    • Hoistaloy load chain can be easily inspected for wear and abuse
    • True vertical lift
    • Factory tested to 125% of rated capacity prior to shipment
    • Metric rated except for 10 & 20 ton capacities
    • Rugged aluminum alloy hoist frame
    • Chain guide surrounds liftwheel
    • Machined and hardened steel Helical gears used throughout hoist for optimum performance and mechanical efficiency.
    • Extensive use of life-lubricated bearings plus sealed oil bath power train reservoir for minimum maintenance.
    • Dual braking system
    • Heavy duty, industrial single speed controls include magnetic reversing contactor which operates on 115 volts provided by a control transformer,
    • Totally enclosed, ball bearing, 30 minute rated, thermally protected, hoist duty motor is standard.
    • Push button control is weatherproof (NEMA4rated).
    • Drop of push button control is 4 ft. above hook at lowest position, unless otherwise specified.
    • External push button chain strain relief is standard.
    • Power cord length is 2 1/2 ft. unless otherwise specified.
    • Trolley design permits easy adjustment for installation on a broad range of beam flange widths.
    • Trolley wheels have double row, tapered roller bearings plus machined and hardened universal treads to permit operation on American Standard or flat flanged sections interchangeably.
    • Spur gearing used in all motorized trolleys for improved efficiency and durability.
    • Drop of hand chain on geared trolleys is 2 ft. above hook at lowest position, unless otherwise specified.
    • Designed to be maintained "on the beam."
    • Up to 600 lineal feet of chain
    • Weatherproof (NEMA3R)
    • Lifetime warranty

  • Image
^