Call: 708-771-1600Request a QuoteRequest a QuoteSearch
  • BUDGIT Air Hoist Accessories, Filter - Lubricator Units

    Air hoists must have a supply of clean, lubricated air for their operation. A filter and lubricator must be installed in the air supply line, as close as practical to the hoist. The recommended operating air pressure for all capacities of BUDGIT® air hoists is 90 psig. When air line pressure exceeds 115 psig, it is required that a pressure regulator be provided in the supply line to maintain proper pressure.

  • Bullard Hooks

    All hoists are furnished as standard with hooks equipped with hook latches. Bullard Hooks with rugged cast swing gate locking member that provides greater assurance of load containment are available at additional cost. Spark resistant Bullard Hooks are not available.

  • Redundant Support

    Hoist suspension redundant support for Series 2200 hoist is available for additional cost. This redundant support features a cable that inserts through the hoist frame and around the initial support.

  • Pendant Throttle Conversion Kit

    Kits for converting the pull cord Series 2200 BUDGIT® Air Hoist to pendant throttle operation has standard 6-foot pendant hose assembly. Longer hose assemblies available. Order Catalog No. 2269. Shipping weight is 8 pounds.

  • Chain Container for Series 2200 Air Hoist

    Chain containers provide an ideal means for eliminating hanging tail chains. They are easily installed and accept the chain in such a way that chains tend not to kink or twist. State codes are more frequently calling for use of chain container with each hoist.

  • Chain Container for Standard Series 6000 Air Hoist

    Chain containers provide an ideal means for eliminating hanging tail chains. They are easily installed and accept the chain in such a way that chains tend not to kink or twist. State codes are more frequently calling for use of chain container with each hoist.

  • Chain Container for Standard Series 6000 Air Hoist

    Chain containers provide an ideal means for eliminating hanging tail chains. They are easily installed and accept the chain in such a way that chains tend not to kink or twist. State codes are more frequently calling for use of chain container with each hoist.

  • Image

    Assembly requires Catalog No. for both hose and fittings

  • Image

    Male Swivel at One End - Standard Male at Opposite End
    Fitting installed on above hose

  • Air Hose Assembly, Air Hose Trolleys

    (For use with Series 2200 and Series 6000 Air Hoists)
    These trolleys are used to support air hose and are installed on the same track as a hoist. Hose clamp swivels and will fit 5/8 to 1-1/2 inch diameter hoses. Shipped from factory in cartons of six only.

  • Image

    For application where air hose trolleys with looped hose is impractical; coil type self-storing hose is recommended.

  • Air Hose Assembly, Self Storing Air Hose with Fittings
  • Image
  • Wire Rope Festoon Systems for Air Supply Hose

    System include (note numerical key in illustration at right):
    (1) 2 end clamp assemblies;
    (2) 1 hardware kit consisting of 2 eye-bolts, 5 clamps and 1 ball stop;
    (3) Intermediate carriers - see specified quantity in last column of chart below;
    (4) Nylon covered wire rope per required length.

    Festooning hose and connectors are not included in the system.

^