Crane & Hoist Equipment & SystemsCrane & Hoist Parts
and Accessories
Service & RepairsInspection SystemsTrainingOur Manufacturers
Sievert Crane & Hoist > Crane & Hoist Parts & Accessories > Duct-O-Wire Conductor Assembly  
 

Duct-O-Wire Conductor Assembly


Click on a category to drill down.

Duct-O-Wire Basic Figure 8 (FE) Conductor Assemblies

Duct-O-Wire Conductor Bar

(6)
Duct-O-Wire Figure 8 Conductor Bars are furnished as assemblies consisting of a ten-foot long conductor bar rated at 600 volts, an insulating cover, splice cover, and connector pins or joint clamps as applicable.
The insulating cover must be appropriate for the environment — indoor, outdoor, or high temperature — in which the conductor is to operate.
Indoor systems are for use in ambient temperatures up to 160°F. They have an Orange PVC Insulating Cover. They are not recommended for outdoor use in direct sunlight.
Outdoor systems are for use in direct sunlight and ambient temperatures up to 160°F. They have a Gray PVC Insulating Cover with an ultraviolet additive.
High temperature systems are for use in ambient ...
Duct-O-Wire Basic Figure 8 (FE) Conductor Assemblies

Duct-O-Wire Basic Figure 8 (FE) Conductor Assemblies

(18)
Duct-O-Wire Figure 8 Conductor Bars are furnished as assemblies consisting of a ten-foot long conductor bar rated at 600 volts, an insulating cover, splice cover, and connector pins or joint clamps as applicable.
The insulating cover must be appropriate for the environment — indoor, outdoor, or high temperature — in which the conductor is to operate.
Indoor systems are for use in ambient temperatures up to 160°F. They have an Orange PVC Insulating Cover. They are not recommended for outdoor use in direct sunlight.
Outdoor systems are for use in direct sunlight and ambient temperatures up to 160°F. They have a Gray PVC Insulating Cover with an ultraviolet additive.
High temperature systems are for use in ambient ...
Duct-O-Wire Special Conductor Assemblies

Duct-O-Wire Special Conductor Assemblies

(5)
All Duct-O-Wire Figure 8 conductor systems can be sized electrically by using the general and technical information contained in this brochure. For applications with special mechanical or environmental considerations, refer to the table below for the proper Duct-O-Bar System to use.
PPS Series Pendant Stations - Single-Speed, Two-Speed and Three-Speed Control

PPS Series Pendant Stations


Complete Pendant Push Button Stations
Each station includes the switches listed plus a legend plate sheet,
Neoprene cord grip, strain relief attachment and Neoprene boots.
Be sure to specify cable diameter when ordering stations.
  • Up to Five Motions plus Accessories
  • Pre-Wired Stations Available from Factory
  • Bright Yellow Finish for Easy Visibility
  • Compact Design Available in Xyron Enclosures
  • Two-Piece Enclosure Simplifies Field Wiring
  • Double-Break Silver-Plated Switch Contacts
  • Neon Pilot Light for Cool Trouble-Free Operation
  • Easy-to-Read Button Name Plates
  • NEP7IA1,3, 4, 4x, and 12
  • UL/CSA Approved (UL: E45587; CSA: LR-24077) « Wide Temperature Range: -10°F to +150°F
  • Replaceable Neoprene Boots
  • Rubber Bushing and Water-Resistant Packing
Site created by ThomasNet Web Solutions and powered by Navigator Platform